Range Rover: Mud-ruts
This program should be used for crossing terrain that is muddy, rutted, soft or uneven.
Low range is recommended for this program and if not selected, the message center will prompt you.
If the Mud-Ruts program and Low range are selected together, the vehicle ride height will be raised automatically.
Grass/gravel/snow
This program should be used where a firm surface is covered with loose or slippery
material.
Note: For deep gravel it is recommended that the Sand program is selected.
Note: If the vehicle is un ...
Sand
This program should be used for terrain which is predominantly soft dry sand
or deep gravel.
Note: If the vehicle is unable to gain traction in extremely soft, dry sand,
switching DSC off may h ...
See also:
Loading tips
► The GVW must not exceed GVWR
or GAWR as specified on the F.M.V.
S.S./C.M.V.S.S. certification label.
► Do not load the front and rear axle
to the GAWR. Doing so will exceed
the ...
Garage door transceiver
CAUTION
Do not use the transceiver with any garage door opener that lacks the safety
stop and reverse feature as required by safety standards.
CAUTION
When programing the transceiver to ...
Stationary range changing
With the vehicle stationary, select N.
Move the transfer gearbox switch towards the range required and release. The
switch returns to the default position and range change status will be confirmed ...
