Range Rover: Selecting valet mode
Valet mode allows the vehicle to be locked by a parking attendant, without giving access to the loadspace. Valet mode also prevents operation of the touch screen, to prevent access to telephone numbers or navigation addresses.
From the Home menu, select Valet:
Enter a 4 digit Personal Identification Number (PIN) (personally chosen). On completion, touch the OK soft key.
If you wish to cancel the PIN, select Delete.
If the PIN is cancelled, or incorrectly entered, you will be prompted to enter the PIN again.
Valet mode activated is displayed to indicate that the PIN has been accepted.
The loadspace is now securely locked in Valet mode and the Valet mode On screen is displayed.
Extra features
There are more features available than can be displayed at one time. This menu
allows the selected features to be displayed, for example:
• Ambient lighting: While the headlamps are turned on, se ...
Deselecting valet mode
When you enter the vehicle, touch the Valet button to view the Valet mode screen.
Enter your 4 digit PIN and touch the OK button. Valet mode deactivated is displayed
to indicate that your PIN has ...
See also:
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center
pillar (B-pillar). With the driver door open, you will find the label attached below
the door lock po ...
Heated steering wheel
The heated steering wheel system is
designed to operate only when the surface
temperature of the steering wheel is below
688F (208C).
Push the heated steering wheel switch to
warm the stee ...
Hazard Warning Flashers
(Hazard Warning Flashers):
Press this button located on top of the steering column, to make the front and
rear turn signal lamps flash on and off. This warns others that you are having trouble.
...
