Cadillac Escalade: Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away.
Make sure the safety belt reminder light is working. See Safety Belt Reminders .
Keep safety belts clean and dry. See Safety Belt Care .
Safety Belt Extender
If the vehicle's safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer will order you an extender. When you go in to order it, take the heav ...Safety Belt Care
Keep belts clean and dry. WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with ...See also:
Cruise control lever
1 To store the current speed or a higher
speed
2 To store the current speed or a lower
speed
3 To deactivate cruise control
4 To store the current speed or to call up
the last stored speed
Wh ...
Front fog lamp bulb replacement
1. Rotate the bulb holder (counter-clockwise) and remove from the lamp unit.
2. Press the two clips together, and remove the electrical connector. ...
BSW system operation
If the radar sensors detect vehicles in the
detection zone, the BSW/Blind Spot InterventionTM
indicator light located inside the
outside mirrors illuminates. If the turn
signal is then activ ...