Range Rover: Rear lamp - bulb replacement
Note: The direction indicator lamp, stop lamp, and tail lamp are LED units, and cannot be serviced.
1. Rear fog lamp.
2. Reversing lamp
3. Twist the relevant bulb unit and pull to access the bulb. Push, twist and pull to remove the bulb.
Rear lamp removal
To change any of the rear bulbs, it is necessary to completely remove the lamp
unit from the vehicle.
1. With the tailgate open, remove the two screws from the inner edge of the unit.
2. Pull th ...
Side repeater lamp bulb replacement
Follow the steps illustrated. Insert a new bulb and refit the components. ...
See also:
ATA (Anti-Theft Alarm system)
A visual and audible alarm is triggered if the
alarm system is armed and you open:
• a door
• the vehicle with the mechanical key
• the tailgate
• the hood
The alarm is not switched off, ...
Towing a trailer
WARNING
Do not exceed the Gross Vehicle Weight (GVW), maximum rear axle weight, maximum
trailer weight or tow hitch load (tongue weight). Exceeding any of these limits
could cause instabilit ...
New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform
better in the long run if you follow these guidelines:
► If you have all-wheel drive, keep your speed at 88 km/h ( ...