Switching the daytime running lamps on/off

This function is not available in Canada.

If you have activated the Daytime Running Lights function and the light switch is in the position, the daytime running lamps are automatically switched on when the engine is running.

In the dark, the following also light up:

• the low-beam headlamps
• the parking lamps
• the tail lamps
• the license plate lamp
• the side marker lamps

On vehicles with daytime running lamps, the factory setting is On ► Switch off the engine.

► Press on the steering wheel to select the Settings menu.
► Press the button to select submenus.
► Press the button to select the Lighting submenu.
► Press to select Daytime Running Lamps.
►Press to set daytime running lamps to On or Off.
► Press the , button to select a different display.

Switching the surround lighting on or off

If you activate the surround lighting function and the light switch is set to , the following will light up if it is dark and you unlock the vehicle using the SmartKey:

• the parking lamps
• the license plate lamp
• the tail lamps
• the fog lamps
• the low-beam headlamps
• the side marker lamps
• the surround lighting in the exterior mirror

The surround lighting switches off automatically after 40 seconds or when the driver's door is opened.

► Press on the steering wheel to select the Settings menu.
► Press the button to select submenus.
► Press the   button to select the Lighting submenu.
► Press to select Surround lighting function.
► Press to switch the Surround lighting function on or off.
► When leaving the vehicle, turn the light switch to position .

The surround lighting is activated.

► Press the , button to select a different display.

Setting the brightness of the ambient lighting

► Press the button on the steering wheel to select the Settings menu.
► Press the button to select submenus.
► Press the button to select the Lighting submenu.
► Press the button to select Ambient light.
► Press the button to adjust the brightness to any level from Level 0 (off) to Level 5 (bright).
► Press the , button to select a different display.

Activating/deactivating the exterior lighting delayed switch-off

If the Headlamp deactivation function is activated and the light switch is in the position, the exterior lighting continues to light for 15 seconds after the doors have been closed when it is dark.

If the engine is switched off and then none of the doors are opened, or if an open door is not closed, the exterior lighting goes out after 60 seconds.

If you have activated the delayed switch-off function, the light switch is set to and you switch off the engine, the following remain lit:

• the parking lamps
• the license plate lamp
• the tail lamps
• the fog lamps
• the low-beam headlamps
• the side marker lamp

► Press on the steering wheel to select the Settings menu.
► Press the button to select submenus.
► Press the button to select the Lighting submenu.
► Press the button to select Headlamp delayed shut-off.
► Press the button to activate or deactivate the Headlamp delayed shut-off function.

► Before switching off the engine, turn the light switch to position .

The exterior lighting delayed switch-off is activated.

► Press the , button to select a different display.

Deactivating the delayed switch-off temporarily:

► Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock.
► Turn the SmartKey to position 2 in the ignition lock and back to position 0.

The delayed switch-off is deactivated.

Delayed switch-off is reactivated the next time you start the engine.

Activating/deactivating the interior lighting delayed switch-off

If the Interior lighting Delayed Shutoff function is activated and you remove the SmartKey from the ignition lock, the interior lighting remains on for 10 seconds.

► Press the button on the steering wheel to select the Settings menu.
► Press the button to select submenus.
► Press the button to select the Lighting submenu.
► Press the button to select Interior Lighting Delayed Shut-off.
► Press the button to activate or deactivate the Interior Lighting Delay function.
► Press the , button to select a different display.