Buick Enclave: Liftgate
To open the liftgate the vehicle must be in P (Park). Press the touch pad under the liftgate handle. To close the liftgate, use the pull cup or pull strap as an aid.
Power Liftgate
On vehicles with a power liftgate, the vehicle must be in P (Park) to operate it.
► Press and hold
on the Remote Keyless
Entry (RKE) transmitter.
► Press the touch pad switch on the outside liftgate handle.
For more information see Liftgate .
Door Locks
To lock or unlock a door manually:
► From the inside, use the door lock knob on the window sill.
► From the outside, turn the key toward the front or rear of the vehicle, or press
the ...
Windows
Press the switch to lower the window. Pull the switch up to raise it.
For more information, see Power Windows . ...
See also:
Deactivating the alarm when triggered
If the alarm has been triggered it can be deactivated by pressing the Smart Key
unlock button, or by positioning the Smart Key underneath the steering column (see
74, IF THE ENGINE FAILS TO START) ...
Delayed Locking
When locking the doors with the power lock switch and a door or the liftgate
is open, the doors will lock five seconds after the last door is closed. You will
hear three chimes to signal that the de ...
Window reset
The windows will need to be reset if the battery is disconnected, becomes discharged
or power supply is interrupted.
Reset as follows:
1. Close the window fully.
2. Release the switch, then lift ...
