Cadillac Escalade: Increasing Speed While Using Cruise Control - Cruise Control - Cruise Control - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Increasing Speed While Using Cruise Control

If the cruise control system is already activated,

. Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.

. To increase vehicle speed in small amounts, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.

    Resuming a Set Speed
    If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 40 k ...

    Reducing Speed While Using Cruise Control
    If the cruise control system is already activated, Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it. To slow down in small amoun ...

    See also:

    Hill Start Assist system
    WARNING ► Never rely solely on the hill start assist system to prevent the vehicle from moving backward on a hill. Always drive carefully and attentively. Depress the brake pedal when ...

    Immobilizer
    See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. ...

    Emergency engine shut off
    To shut off the engine in an emergency situation while driving, perform the following procedure: ► Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 sec ...