Infiniti QX: Front seats
Front power seat adjustment Operating tips:
► The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds,
then reactivate the switch.
► Do not operate the power seat switch
for a long period of time when the
engine is off. This will discharge the
battery.
See “Automatic drive positioner” in the “3.
Pre-driving checks and adjustments” section
for the seat position memory function.
CAUTION
When adjusting the seat positions, be sure
not to contact any moving parts to avoid
possible injuries and/or damages.
Forward and backward:
Moving the switch1 forward or backward will slide the seat forward or backward to the desired position. Reclining: Move the recline switch2 backward until the desired angle is obtained. To bring the seatback forward again, move the switch 2 forward. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “Precautions on seat belt usage” later in this section.) Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the transmission is in the P (Park) position.
Seat lifter:
1. Pull up or push down the adjusting switch to adjust the seat height until the desired position is achieved. 2. Tilt up or down the adjusting switch to adjust the front angle of the seat until the desired position is achieved (for driver’s seat).
Lumbar support:
The lumbar support feature provides lower back support to the occupants. Push the front or back end of the switch to adjust the seatback lumbar area.
Seats
WARNING
► Do not ride in a moving vehicle when the
seatback is reclined. This can be dangerous.
The shoulder belt will not be
against your body. In an accident, you
could be thrown ...
2nd row seats
WARNING
► Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could resul ...
See also:
Deselecting valet mode
When you enter the vehicle, touch the Valet button to view the Valet mode screen.
Enter your 4 digit PIN and touch the OK button. Valet mode deactivated is displayed
to indicate that your PIN has ...
Parking position for the exteriormirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. Yo ...
Manual Mode
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the
vehicle's speed while driving downhill or towing a trailer.
The vehicle has an e ...