Weights

...

Bulb specification

NOTICE Before attempting to replace a bulb, ensure that both the affected lamp and the vehicle's ignition, are turned off. If the circuit remains live, a short circuit can occur which ma ...

See also:

Rear Wiper Blade Replacement
1. Lift the wiper blade assembly up and out of the park rest position. 2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so ...

Clock
To adjust the time and date: 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press to turn the radio on. 2. Press to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) ...

Making adjustments in 1 mph (Canada:1 km/h) increments
► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...