Infiniti QX: BSW/Blind Spot InterventionTM malfunction - Blind Spot Warning (BSW) system/Blind Spot InterventionTM system (if so 
equipped) - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: BSW/Blind Spot InterventionTM malfunction

When the BSW/Blind Spot InterventionTM systems malfunction, they will be turned off automatically, a beep will sound and the BSW/Blind Spot InterventionTM system warning light (orange) will illuminate. Action to take: Stop the vehicle in a safe location, turn the engine off and restart the engine. If the warning light (orange) continues to illuminate, have the BSW/Blind Spot InterventionTM systems checked by an INFINITI retailer.

    BSW/Blind Spot InterventionTM driving situations
    Another vehicle approaching from behind The BSW/Blind Spot InterventionTM indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane. However, if t ...

    System maintenance
    ► The two radar sensor units 1 for the BSW and Blind Spot InterventionTM systems are located near the rear bumper. Always keep the area near the radar sensors clean. Do not attach st ...

    See also:

    To erase all programing
    For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...

    Consistency of Readings
    Always check the fluid level at least twice using the procedures described. Consistency (repeatable readings) is important to maintaining proper fluid level. If fluid is added, it may take 15 minute ...

    Cargo tie-down rings
    Observe the following notes on securing loads: • secure the load using the cargo tie down rings. • do not use elastic straps or nets to secure a load, as these are only intended as an anti ...