Infiniti QX: Air cleaner - Maintenance and do-it-yourself - Infiniti QX Owner's ManualInfiniti QX: Air cleaner

To remove the filter, release the lock pins

To remove the filter, release the lock pins 1 and pull the unit upward 2 . The filter element should not be cleaned and reused. Replace it according to the maintenance intervals. See “INFINITI Service and Maintenance Guide” for maintenance intervals. When replacing the filter, wipe the inside of the air cleaner housing and the cover with a damp cloth.

► Operating the engine with the air WARNING

► Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed.
► Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury.

    Spark plugs
    WARNING Be sure the engine and the ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorre ...

    See also:

    Before programing
    NOTICE When programing a device that may require you to press and re-press the hand-held transmitter (cycle), unplug the device during the cycling process to prevent possible motor failure. ...

    Transmission
    Driver Shift Control (DSC) The DSC switch is located on the shift lever. To enable the DSC feature: 1. Move the column shift lever to the M(Manual) position. The Driver Information Center (DIC) ...

    Monitoring range of the sensors
    Blind Spot Assist monitors the area shown in the figure up to 10 ft (3 m) behind and immediately adjacent to your vehicle. WARNING   Blind Spot Assist monitors certain areas in the im ...